10000L/H Automatic Dirty Submersible Water Pump

Suitable for draining water that contains grit, sand and mud. This highly economical submersible dirty water pump is ideal for pumping water from cellars, ponds, flooded gardens and pools.

This 10000L/h model runs at a very low 80w and features an automatic cut out float switch meaning the pump can be operated without the risk of it running dry.
The pump design includes a heavy-duty integrated handle for easy transportation / movement as well as including two different type of hosetails (fitting 25, 32, 38 and 50mm pipe) and a 90 connection pipe allowing you to connect pipe vertically to the pump.

This water pump is not suitable for agriculture or for draining water containing salt and other chemicals.

Please note this pump includes a fixed moulded plug for short-term use. If using the pump in a permanent position we strongly advise that the plug is cut off and the power cable is wired into an RCD unit or similar.

The pumps handle includes an attachment for the cut off flow switch’s cable that allows you to regulate the height in which the pump will turn off.

Features

• Extremely economical low wattage pumps useful for a variety of tasks
• High water flow with low energy consumption for energy conscious and environmentally friendly operation
• Designed to pump dirty water from any submerged area
• Cut off float switch ensures the pump cannot run dry
• Heavy duty handle for easy movement / repositioning
• Includes hosetails to fit 25/32/38/50mm hose and a 90 connection pipe
• Suitable for use in the home and garden
• Flow rate:10000L/h
• Height Max:600cm
• Cable Length:10M
• Wattatge:80w
• Height:295mm (including handle)
• Diameter:170mm (not including hosetails)
• Voltage:220-240V
• Inlet / Outlet hosetail connector: 25/32/38/50mm
• Free 12Month Warranty

Please Note :In compliance with UK electrical regulations, these pond pumps are supplied without a fitted UK plug. A suitable plug or outdoor switch box must be purchased separately.